Special crane for dismantling tower cranes at work on Europe‘s biggest construction site in Moscow.

Disassembly at great heights

The 200 DR 5/10 Litronic special crane will be used in Moscow for dismantling tower cranes on the Federation Tower at a height of more than 250 m. The derrick crane has no trouble dismantling tower cranes in the 300-mt-plus lifting capacity category. On the Federation Tower, the derrick crane will dismantle and lower luffing jib cranes of the 160 HC-L 8/12 Litronic and 355 HC-L 16/32 Litronic upon completion of the tower.

Adaptable all-purpose machinery

Depending on the requirements, the new derrick can be configured with load moments of 100 mt or 200 mt. The supports of the 200 DR 5/10 Litronic are articulated and will be adapted to the structural circumstances of the substructure on the Federation Tower in order to achieve optimum distribution of the support forces. Depending on the application, the special crane can be used with or without supports, known as stiff legs.

Variable working radius

Thanks to its variable working radius of up to 25 m, the derrick crane can lower the heavy parts of the dismantled luffing jib cranes at a sufficient distance from the building.

The derrick crane which is equipped as standard with a hoist gear for heights of more than 300 m lifts all loads in single- and double-reeved operation.

Safety-orientated controls

Safety is a factor of great importance in crane operation on buildings hundreds of metres tall. The safety-orientated PLC controls in the Liebherr 200 DR 5/10 derrick crane monitor all movements with the tried and tested functionality found in all Liebherr luffing jib cranes. Sensors monitor and safeguard the lifting height, load moment, jib inclination and slewing gear. Using remote controls, the crane operator can operate the crane from the most advantageous position.

Rapid auto-dismantling

Once the luffing jib cranes have been completely dismantled and lowered, the derrick can be stripped down into individual parts which can be lowered in the building‘s lift shafts. The maximum dimensions of the individual parts come to 2.20 m x 1.10 m x 1.10 m with a maximum weight per package of 1,000 kg.

Upon completion, around 100,000 people will live and work in Moskwa City.

Technical Data 200 DR 5/10
  • Max. lifting capacity: 10.000 kg
  • Lifting capacity at jib head: 7.500 kg
  • Working radius: 20,0 / 25,0 m
  • Heaviest component: 1.000 kg
  • Largest component: 2,20 x 1,10 x 1,10 m

Contact us

Vyplněním a odesláním formuláře uděluji svůj výslovný souhlas k tomu, aby obchodní společnost KRANIMEX spol. s r.o., IČ: 48116882, se sídlem Nedokončená 1638, 198 00 Praha 9 - Kyje, zapsaná v obchodním rejstříku vedeném Městským soudem v Praze, oddíl C, vložka 16905, jakožto správce osobních údajů dle příslušných právních předpisů (dále jen „správce“) zpracovávala, uchovávala, shromažďovala a nakládala (dále jen „zpracování osobních údajů“) za účelem marketingového využití tyto mé osobní údaje: jméno, příjmení, telefonní kontakt, e-mail, údaje o komunikaci se mnou a veškeré další osobní údaje mnou poskytnuté. Tento souhlas uděluji na dobu neurčitou a jsem si vědom(a) toho, že jej mohu kdykoliv odvolat; požadovat po shora uvedeném správci informaci, jaké mé osobní údaje jsou jím zpracovávány; požadovat vysvětlení ohledně zpracování osobních údajů; vyžádat si přístup ke zpracovaným osobním údajům; požadovat opravu nebo aktualizaci zpracovaných osobních údajů; požadovat výmaz zpracovaných osobních údajů, uplatňovat námitky proti zpracování osobních údajů a dále v případě pochybností o dodržování povinností souvisejících se zpracováním osobních údajů se obrátit na správce nebo na Úřad pro ochranu osobních údajů. Nad rámec výše uvedeného souhlasím i s tím, že zpracováním může zpracovatel pověřit třetí osobu, jakožto zpracovatele.

Tento web používá k poskytování služeb, personalizaci reklam a analýze návštěvnosti soubory cookie. Používáním tohoto webu s tím souhlasíte. V pořádku Další informace